© 2006 All Rights Reserved

Telephone 631- 427- 2586

9 am - 5 pm  EST

Click below for e-mail

Click here to visit Medical Systems for Industry

Packaging Systems for Industry email

Info@pacs4i.com

Email: info@pacs4i.com

Click here for E Mail

Packaging Systems Home.
Table Top Heat Sealers.
Pouch Filling Machines.
Form Fill Seal Machinery.
Packaging Machines.
Custom Packaging Machines.
Automatic Loaders.
Modified Atmosphere.
Shrink Wrappers, Heat Tunnels.
Industrial Heat Sealers.
Hand Held Heat Sealers.
Tube Heat Sealers.
Vacuum Heat Sealers - Chamber.
Vacuum Heat Sealers - Snorkel.
Custom Heat Sealers.
Blister Sealing Machines.
Flexible Packaging - Bags.
Vapor Barrier for Crating -Shipping.
About us and Contact us.

Medical Vacuum Chamber Heat Sealers,PLC/HMI operated medical vacuum chamber heat sealer is the most advanced for optimum control of your vacuum requirements. This medical upgrade can be added to any Single or Double Chamber Vacuum Heat Sealer.

Each Stainless Steel medical vacuum chamber heat sealer is ideal for all applications medical, pharmaceutical or industrial applications where precise control over vacuum level is required. The PLC/HMI system allows you to control vacuum draw in inches of HG or time. Either can be maintained to 30 inches of HG or less. The optional gas flush system can be programmed with pressure or time. Temperature for the seal bar is controlled through a thermocouple employing the same Precise Seal process used in all of our medical equipment. The accuracy of the Medical Vacuum Chamber Heat Sealer preset temperature is +/- 1 Deg. F.

Features for the Medical Vacuum Chamber Heat Sealers include the ability to minimize boil over of liquids and regulate the speed of air evacuation and reintroduction. Each medical vacuum chamber heat sealer is validatable with calibration ports. Multi stage gas-vac or vac-gas can be programmed in to the touch screen. Once you have determined your process parameters the package(s) to be sealed is placed inside the chamber with the open end across the seal bar. The operator closes the lid, the Medical Vacuum Chamber Heat Sealer then goes through the complete cycle and releases the lid when finished. Typical cycle times range from 15-25 seconds.

Features for Medical Vacuum Chamber Heat Sealers

 

Polished 316 Stainless Steel

High capacity Busch Vacuum pump

Calibration ports

Wipe down capability

Type K thermocouple

Accurate seal bar temperature (+/- 1 deg. F)

Vacuum controlled by inches of HG or time

Purge controlled by pressure or time

Cooling controlled by time or temperature

Exhaust port

Alarm features

Seal counters

Trouble shooting screens

Dual elements (top and bottom or side by side)

Choice of element size (1/8, 3/16, ¼, 3/8 or ½ inch wide)

 

Medical Vacuum Chamber Heat Sealers

Medical Vacuum Chamber Heat Sealer

Medical Vacuum Chamber Heat Sealers

Click for all model sizes and specs